|Line 1:||Line 1:|
Latest revision as of 17:06, 23 May 2013
Note: This piece of equipment no longer exists as such. However, the notes below that refer to the Canon EOS 5D camera and its operation may still be useful in troubleshooting the new configuration of that capture station.
Locally referred to as the "BookDrive", this unit actually consists of an Atiz BookDrive DIY cradle/station with two Canon EOS 5D cameras. Per the manufacturer website, the unit is suitable for making scans of items with maximum dimensions of 15.7 x 23.2 inches and up to approximately 3.5 inches thick. source: BookDrive DIY. Retrieved February 02, 2011, from http://diy.atiz.com/
To date the unit has been used to make scans for bound copies of items such as the Rammer Jammer.
For usage instructions, see the "cheat sheet" under Troubleshooting.
 Technical Information:
 Default Setup
Canon EOS 5D (basic settings):
- 1/15 (shutter speed)
- F7.1 (aperture)
- ISO 320 (iso speed)
- M (focus setting from dial)
- RAW (image quality)
- AWB (auto white balance)
When set, these setting will show up in the BookDrive Capture software:
 Default File/Output Settings
 Associated Hardware
 Associated Software
- version 184.108.40.206
The Canon EOS 5 is not compatible with 64 bit version of Windows 7, therefore a virtual installation of Windows XP (32 bit) is needed to use the camera to take scans with the BookDrive Capture software.
This cheat sheet contains basic instructions on how to run the camera/capture software from within a virtual installation of Windows XP.
 Resources and Links:
"virtual machine" - Wikipedia article