BetterLight Scanning Guide

From UA Libraries Digital Services Planning and Documentation
Revision as of 15:34, 6 August 2008 by Jjcolonnaromano (talk | contribs)

Jump to: navigation, search

Hello, this is the comprehensive guide to the use of the Betterlight overhead scanner. Lets begin scanning.

Setup


Turning on the machine: There are two power switches that need to be on for the computer to recognize the scanner

on the power supply located under the scan table
on the small external scanning harddrive
once these are on you will see a green light flashing on the scan back located in the camera

Turning on the lights: There is a red switch on the back of each hotlamp, flip these switches.

Turning on the program: Open the Viewfinder 4.7.1 application


Preparing to make a scan


  1. Select crop tool and open selected area it to the full size of the preview area.
  2. Place your materials to scan on the scan table. along with the focus card and the grey scale strip. Making sure to place those cards on the surface you want to image.
  3. Click the "prescan" button. (you need to do this right off the bat when opening the program for the first scan of the session, viewfinder will not let you do much else untill you make a prescan.
  4. Once you have made a prescan of your materials on the scan table, click the crop tool again and size the scan area down by dragging one of the corner pips making a rectangle that better fits your materials.